How to install KBX Diffuser on 600 EX-RT /  580EX II-RT and notes
 

 

Step1. Put on the rubber collar at the head of flashgun, then move the rubber collar to the location shown in the photo

 

 

 

 

Step2. Fold the rubber collar

 

 

 

 


Step3. Put on the KBX Diffuser and fill the gap between the Diffuser and rubber collar by pushing the rubber collar up

 

 

 

 

Step4. After filling the gap, your flashgun should look like the photo

 

 

 

 

Step5. Unfold the rubber collar, and the Diffuser will be well held

 

 

 

 

 

Step6. If you’re using Canon 580EXii-RT remember to not push the Diffuser in too far, otherwise you cannot insert the Color Filters
Tips: Insert the Color Filter into the Diffuser first

 

 

Step7. Fold the rubber collar before taking off the Diffuser, and keep it on the flashgun like in the step1 photo for next use


 

 

Step8. When you use the Diffuser next time just start from step5

 

 

 

 

Things to know about storing KBX Diffuser

Please fold KBX Diffuser as the photo shows down below when it’s not being used for a long time